Garbage Chute systems are the channels where the garbage accumulated on the floors or in the independent sections is disposed in order to collect the garbage in a regular, safe, hygienic and fast manner in buildings such as hotels, hospitals, business centers, restaurants, shopping malls, residences, dormitories, and mass housing. The garbage chute consists of different sections and parts such as circular flat module, capped module, end module, ventilation device, cleaning unit, automation panel, guillotine cover, fixing equipment. At the bottom of the system, there are containers for the collection and transportation of garbage, and at the top there are ventilation ducts and a hat or roof fan. The rules of TS 2166 should be followed in the construction of garbage chimneys.
This invention is a separator system that can be mounted on the garbage chute used in apartments, business centers, and buildings with one or more floors and will be used to collect the waste by separating it.
With the help of the separator, the wastes are mixed, metal, paper, etc. are classified as waste and disposed of in separate waste bins. Thus, recyclable wastes can be reused after processing. Since there will be no need for more than one garbage chute, both space savings are provided and savings are provided from the cost of additional garbage chutes.
In the garbage chimney system, the buttons on the lids that determine the type of waste according to their class are pressed, and after the separator is turned into the appropriate waste box, the discharge cover is opened and the waste is disposed of. Thus, it is ensured that the waste goes to the desired waste bin.
- It should be made of stainless steel material that has a smooth surface, does not absorb water, is fire resistant and will not corrode.
- To clean the inside of the chimney, a chimney cleaning (washing) device should be made.
- The garbage chute should have a minimum 45 cm circular cross section.
- shute doors should be made at a height of 90 cm from the ground.
- The top of the garbage chute should be raised above the roof height to provide ventilation.
- In order to prevent noise in chimneys, appropriate measures should be taken at building contact points,
• Eliminates the need to collect garbage from apartments one by one
• Hygiene
• Speed and convenience
• Health
• Confidence
• Aesthetic
• Increasing life comfort
WHY GARBAGE CHUTES MUST BE MADE OF STAINLESS STEEL
A RESIDENCIAL ACTIVITY REPORT
THE NAME OF THE COMPANY AND THE SITE IS EXTRACTED FROM THE ARTICLE..
• On September 16, 2014, as a result of the fire in the block, a garbage chimney made of stainless steel material was installed instead of the completely burned garbage chimney of the block. It has been sent to our insurance company ……… Insurance in order to cover the expenses made from our insurance policy, and the payment is expected to be made as soon as possible.
• All garbage chutes on our site are made of flammable polyurethane material, which is ……. It is stated in the fire brigade report and the Chamber of Mechanical Engineers report obtained as a result of the block fire.
MECHANIC COMPANY IS RESPONSIBLE FOR THE WORK DONE AFTER THE WORK IS DELIVERED.
• Garbage chutes………………. In the event that the change is not made by the company, the company that will perform the chimney replacement has been selected, the cost has been determined, the general assembly approval has been received and the flat owners have been informed. In the event that the garbage chutes are replaced by us, a legal process will be initiated for the recourse of the costs incurred to the ……………………………….. company.
All these developments are the wrong choice of the preferred material in order to be cheap. For this reason, the material of the garbage chimneys should be stainless steel.